I’ve been collecting kawaii chocolate molds for a couple of years, but never got around to using them :( Last weekend I finally put them to use and discovered they are quite easy to work with! I can advice you to start by using dark chocolate (pure or milk). White chocolate or lighter candy melts are a bit trickier to melt, because they have a lower burning point.
- You will need:
- Chocolate and/or Candy Melts
- Chocolate mold
- Small Bowls
- Lollipop sticks
- Cellophane (cake pop) wrappers
The mold came with yellow sticks, but I used white cake pop sticks for this tutorial.
1. Microwave the chocolate at intervals of 20-30 seconds at about 600 watt until melted. This will probably take 2-3 minutes in total.
2. Stir the melted chocolate with a spoon and let it cool down a little.
3. Use a tea spoon to put the chocolate inside the mold until it’s half-filled.
4. Now slightly lift up the tray and gently tap it on the table a couple of times, to evenly distribute the chocolate.
5. Place sticks on each of the shapes, and fill the remaining half with chocolate.
6. You can repeat step 4 if you want flat backsides, but you might have to re-position the sticks a little afterwards.
7. Put the mold in the refrigerator for about 1-2 hours. *patience*
8. Carefully remove the shapes from the mold, by stretching it a bit, and the lollipops are ready! (*^▽^*)ᵞᵘᵐᵐᵞ
I’ve created the eyes with a chocolate filled deco pen and white nonpareils sprinkles.
Cake pop wrappers are great if you’d like to turn the lollipop into a kawaii gift. For the ribbons above I’ve used the fork bow trick.
Where to get those chocolate molds?
– I can recommend jBox, Tout Mignon and Worldofkawaii for kawaii molds.
– Modes4U has got a nice collection of Sanrio and San-x molds.
– And if you plan to visit Japan, you should really check out a Daiso store.
What chocolate can I use?
I’ve used melting chocolate, but any regular plain chocolate bar would do. You just have to break/chop it into small pieces and follow the steps above.
Now the pink candy melts were a whole other story. At first I microwaved the wafers for too long and it ended up looking like marshmallow puke:
Thanks to the internet I learned that you will have to microwave candy melts at intervals of about 20-30 seconds and stir the wafers in between. Eventually you’ll see that they’ll start to melt, but the substance is quite thick. You can thin it by adding a bit of coconut oil or crisco. You could also mix white chocolate with a little bit of strawberry Nesquik or food coloring to create pink chocolate.
I hope you’ll enjoy the lollipops, they are also great to dip in hot drinks!